Highlights
• - 4-20mA signals at one location wirelessly replicated at remote location.
• - Plug and Play product for most applications
• - Isolated Outputs Allow a Single External Supply to Control All 4-20mA Devices
• - Works as a standalone device. No computer required
• - Intuitive configuration software if modification to stock functionality is required
• - Long Range Wireless Communications with 128-Bit AES Encryption
• - 4-20mA Current Loop Inputs Supply 10V, 16V, or 24V to External Sensors
• - Dual 9-32V DC Power Interface with Power and RGB Status LEDs
• - Long Range Wireless Communications up to 2 Miles at 900MHz
• - 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
• - Durable Extruded Aluminum enclosures
• - Pluggable screw terminal connections simplify installation and removal when needed

Wireless 4-20ma Transmitter Receiver 4 Channel Pair

To put it simply, the wireless 4-20ma transmitter receiver products will monitor 4-20mA signals on the input board and wirelessly tell the receiver board to set it’s 4-20mA outputs to the same state. These devices are sold in pairs and operate on a one to one basis with no computer or configuration necessary.

4-20mA Receiver/Input — This part of the setup will connect to 4-20mA sensor. The 4-20mA receiver has an on-board 16V power supply. This power supply can be used to power up the any 4-20mA transducer connected to this receiver. The 4-20mA input module has 4 independent 4-20mA inputs.

4-20mA Transmitter/Output — This part of the setup will connect to PLC or any other device which is expecting 4-20mA signal from the sensor. This wireless 4-20ma transmitter receiver product has 4 isolated 4-20mA output.

Parameter Name	Parameter Value
Network	WiFi
Number of channels	4-channel