Low Flow Gas & Liquid Flow Control Valves

The Brooks® NRS™ (non-rising stem) flow control valves are designed specifically for extremely low flow gas and liquid applications. Straight and 90° angle pattern models in stainless steel are available. Ideal for rotameters with needle valves, the line allows needle valve flow control by adjusting a sliding tapered needle. This prevents sticking caused by foreign matter in the fluid. These flow control valves are particularly suitable for precise control requirements and possess a high turns-to-lift ratio. The flow is constant for any given stem position.

Six needles with different tapers provide a wide choice of flow ranges. Needles and orifices can be changed without removing the valve body from the line (two different orifices are used, one for needle sizes 1-3, another for sizes 4-6).

Features
• Smooth non-reversing flow characteristics
• Constant flow at any given stem position
• Fifteen turns full open to full close provides high turn-to-lift ratio for excellent resolution
• Six interchangeable needle tapers, each increases capacity by an approximate factor of three
• O-ring seal cannot be damaged by overtightening
• Panel mounting nuts included as standard
• 1/8" NPT connections integrally machined into body

For Use With
• Mass Flow Meters
• Variable Area Flow Meters

Differentiator

Designed for Extremely Low Flow Applications

Straight and 90° Angle Pattern Models Available

Wide Choice of Flow Ranges

Parameter Name	Parameter Value