The Copley Controls CAN family of products offer cost-effective CAN interface solutions to host PCs. Complete with on-board microcontrollers, network diagnostics and bus loading analysis, the CAN family provides comprehensive networking tools suitable for all CAN applications.

Specifications
CONTINUOUS CURRENT
1A

DIMENSIONS
106 x 71 x 24 mm

ENVIRONMENT
Commercial

Features
• Single galvanically isolated CAN channel
• High speed (480 Mbit/sec) USB interface
• Supports CAN 2.0A and 2.0B message format
• 32-bit RISC processor
• ISO 11898 compliant high-speed interface
supports up to 1 Megabit/sec bit rates
CAN Monitor Software
• View CAN messages
• CAN bus loading
• Diagnostics
• Download firmware
Plug-and-play
• CML & CMO
• Xenus
• Accelnet
• Stepnet

DESCRIPTION
The CAN-USB-01 is a single channel CAN interface card with a high speed USB interface to a host PC. The CAN interface is galvanically isolated to protect the PC hardware and provide better noise immunity in industrial environments.
The card incorporates a high performance 32-bit RISC processor. This processor handles all low level details of HIGH SPEED USB Most USB based CAN interfaces utilize the 12 Mbit/ sec full speed USB. The CAN-USB-01 uses the much faster 480 Mbit/sec high speed USB protocol to minimize communication latency.
USB is inherently a polled bus. This means that all communication is initiated by the bus master (PC). It’s not possible for a slave device to communicate a state change to the master independently, the slave must wait until the master requests the devices state.

Parameter Name	Parameter Value
Options	USB high-speed CAN-Bus