Operation Mode: - 10/100 Base Ethernet switch
Ports: - 3: Ports 1 & 2 - 100 Base FX
Port 3 - wire port 10/100 Base-T(x)
Input/Output Interface: - Shielded RJ-45, ST/SC/LC/MT-RJ
Transmission Distance: - See chart
System Wavelength: - 1300nm MM or SM
Data Rate: - 10/100 Mbps
Bit Error Rate: - 10-9
Operating Temperature: - -40 °C to +85 °C
Weight: - 0.60 lb (272 grams)
Enclosure: - IP30
Power: - 10 to 28VDC, 5 watts
Size: - 5.25" X 4.06" X 1.21"
(133 X 103 X 31 mm)
Flange mounting option
DIN RAIL option
Relative Humidity: - 10 to 90% Non condensing

Features:

Layer 2 switch meets IEEE 802.3
Unmanaged 3 port (2 optical & 1 electrical) 10/100 Mbps switch
Optical Ports 1 & 2 - Various combinations: MM/MM, MM/SM, SM/SM - 100 Base FX
Wire Port 3 - 10 or 100 BASE- T(x) wired as MDI - X
Optic Connector options: ST/SC/LC/MT-RJ
Status indicators: PWR, Link/Activity, 10/100
Switch for port 3 configuration
Ethernet switching:

Packet Buffer size - 64KByte frame buffer
Bandwith - 1Gbps memory bandwidth
QoS - 802.3p based priority separating incoming packets into high and low priority transmit queues
Address lookup - 1K MAC address lookup table with 5 minutes aging
Frame discard - Discard illegal short and long frames according to 802.3u
10/100Base-T(X) Flow Control - Full duplex: 802.3x; Half duplex: back pressure
Auto - Negotiation - 10 BASE-T, 100BASE TX

Parameter Name	Parameter Value
Type	unmanaged
Number of ports	10/100BaseT(X), 3 port
Network	layer 2 fiber optic
Mounting	DIN rail flange
Other characteristics	RJ45 IP30