Programmable motor indexers for both servo- and step motors

SMI30 and SMI31 are programmable motor indexers which can operate with both servo- and step motors. SMI31 includes a module interface.
The Indexers are characterized by their ability to be controlled either via the RS232/485 interface, or via the general purpose inputs in connection with a downloaded program.

• Simple basic programming
• Setup/program stored in EEPROM
• Large speed range. 2 to 2,000,000 pulses/sec.
• Exact speed resolution +/- 0.5 pulse/sec.
• Connection of up to 32 indexers on the same RS232/485 interface bus
• EMC compliant construction - CE marked
• Absolute/Relative positioning
• 8 General purpose inputs
• 8 General purpose outputs
• 1 10bit Analogue output +0-5V
• 2 10bit Analogue inputs +0-5V
• End-of travel limit inputs
• High speed counter/encoder inputs
• Handshake signals to the servo/step driver
• All general purpose I/Os monitored by LEDs

Parameter Name	Parameter Value
Applications	for stepper motors
Other characteristics	programmable