Protocol Converter / Gateway from serial interface to PROFIBUS DP

TU-RS485-PB Profibus DP to Modbus RTU Converter is a PROTOCOL CONVERTER that connects devices such as thyristor units, controller and soft starter via their serial interfaces to Profibus DP. RS232, RS485 und RS422 interfaces are on Board as a standard feature.
The communication between the serial side and the Profibus takes place either through the device configuration and a selection of the commercially available protocol, such as Modbus ASCII, Modbus RTU (Master or slave), 3964 (R), RK512, DIN measuring bus, DIN 19244, or the device is controlled by a script.

Complete PROFIBUS
Max. 244 byte input- and 244 byte output-data
Automatical Baud rate recognition (9600 bit/s-12 Mbit/s)
Isolated PROFIBUS interface with 9-pin. D-sub connector, optional galvanic isolation of the RS-side
Serial RS232, RS 422-, RS485- and SSI-interface on board
Baudrate of the device’s serial interface adjustable up to 625,000 bit/s
PROFIBUS address adjustable via rotary switch
When using the RS485-device interface up to 32 participants can be connected
Configurable for standard applications (Modbus ASCII, Modbus RTU Master or Slave, RK512, 3964, 3964R, DIN 19244)

Parameter Name	Parameter Value
Type	protocol
Bus	serial, RS422, Modbus RTU, PROFIBUS DP