Type 1C is an enhanced type that contain a ProfiTrace core for monitoring 4 PROFIBUS networks and an advanced web server for permanent remote maintenance of the PROFIBUS installation over Ethernet (hardware is identical as a type 1A).
For monitoring repeater modules or slave modules are required to provide PROFIBUS telegrams on the backplane network.

Through the ProfiTrace 2 software package, OPC tags can be directly streamed from the Head Station type 1C. ProfiTrace 2 will run with full monitoring functionality and the user can benefit from its features.

The Head Station provides power to all modules through its redundant power supply.

General
32 (10 repeater modules positioned in the first 10 slots)
Redundant power supply
uSD card holder for 32 GB (SD and SDHC)
USB connector for firmware updates

Ethernet
10 / 100 Mbps link speed
Protocols: HTTP, FTP, SMTP, TELNET, SNMP, CommDTM
Ethernet connector: RJ-45
Ethernet cable length: max. 100m
Ethernet MAC address: 9C.B2.06.xx.xx.xx (label on the side of the Head Station)
Ethernet default IP address after reset/purchase: 192.168.1.254
Ethernet connections: 20 simultaneous web server clients

Web server with ProfiTrace OE
Status of all modules
Live List
Statistics
Message recording
Email and log on PROFIBUS events
System log

Power supply
Operating voltage: 11..26 VDC
Backplane current: 2.5 A
Relay contact voltage: 24 VAC
Current consumption: 800 mA (fully loaded)
Power: 20W
Reverse polarity protection: Yes
Wire diameter: < 2.5 mm2

Parameter Name	Parameter Value
Applications	process server
Interface	Ethernet, USB, PROFIBUS