The Trig-Tek™ 368A Sensor Conditioner is designed to accept inputs from ICP-
type sensors; outputs are proportional from 4 to 20 mA

Product Information
The Trig-Tek™ 368A provides an internal switch for each channel that selects the adjustable sensor “Curr” either “On” or “Off.” The 4 to 20 mA output current corresponds to 0 to 500 mVrms Full Scale (FS) engineering units (eu) with a 100 mV/ eu sensor. FS is adjusted by an internal gain potentiometer for 5 to 50 FS eu. The inputs and outputs are on BNC connectors. The 368A has a power input of 20 to 36 VDC at approximately 125 mA. The primary power has 500 V isolation from signal ground. Power is via a 3-Pin PT02A-8-3P. Connector pin A is plus power; B is return; and C is chassis ground. The mating connector is a PT06A-8-3S-SR. 10 to 18 VDC power can be supplied as an option at the time of order.

Key Features
• 4 channels
• 100 mV/eu input sensitivity
• 5 to 50 Full Scale (FS) engineering units (eu) (adjustable)
• 2 to 5 mA sensor Curr
• 4 to 20 mA outputs
• FS AC output
• Isolated primary power
• BNC inputs and outputs
• 20 to 36 VDC power

Parameter Name	Parameter Value
Options	multi-channel
Applications	for sensors