IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH1 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.

Features

-High Speed AirConnectivity: WLAN interface support up to 150 Mbps linkspeed
-Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
-Provide 2 port 10/100Base-T(X) Ethernet ports
-Support X-Roaming < 100 ms
-Support AP/Client/Bridge/AP-Client Mode
-Support Multiple-SSID to 4 SSID
-Secured Management by HTTPs
-Wireless connecting status monitoring
-Event Warning by Syslog, Email, SNMP Trap
-1KV isolation for PoE P.D. port of IAP-420+
-Rigid IP-30 housing design
-DIN-Rail and Wall-mount enabled

Parameter Name	Parameter Value
Network	wireless Ethernet PoE LAN
Other characteristics	industrial DIN rail