About
High precision stepper motor. Geometry and magnetisation optimised for smooth running
Phytron ZSS stepper motors (19 - 56 mm) offer high precision combined with smooth running. With up to 102.400 approachable positions (200-step motor, driven in micro stepping mode with 1/512 step resolution and encoder) the ZSS motor provides your application with high precision positioning capabilities. Based on it's geometry the ZSS series performs with a smooth low resonance running performance. Benefit from the low noise generation, the typical smooth running and the resulting optimal results, especially for optical high precision applications.
Technical Details
• Two-phase hybrid stepper motors for unipolar or bipolar control mode
• Holding torques from 3.8 to 700 mNm
• Sizes ZSS 19 to 56 mm
• Up to 3 motor types and 3 standard windings per size
• Standard number of steps/rev.: 200, step angle: 1.8°
• Special number of steps depending on the motor size
• Minimum protection mode: IP40
• Permissible ambient temperature: -30 °C to +80 °C
• Optional: gear, motor brake, encoder, 2nd shaft, heat sink, coupling, etc.
Available Models
• Sizes, numbers of steps, windings: see table in the data sheet
• Free wire ends or protective cover, heat sink, 2nd shaft
• Gear, motor brake, encoder
PARAMETERS
| Parameter Name | Parameter Value |
|---|---|
| AC/DC |
DC
|
| Type |
two-phase stepper
|
| Voltage (V) |
70 - 70
|
| Protection class |
IP40
|
| Applications |
industrial
|
| Other characteristics |
high-precision
|
| Intensity (A) |
0.6 - 2.5
|
| Torque (Nm) |
0.0038 - 0.7
|
| Operating temperature (°C) |
-30 - 80
|
