• Industrial case with DIN rail mounting suitable for Safe AREA installation

• Equipped with high efficiency redundant green and red LEDs for connection monitoring

• N.1 x N.O. contact for safety application up to SIL 2 (ECS-RF-DIN only)

• N.1 x SPST N.O. contact for clamp state remote monitoring

• N.2 x Ex i outputs for remote clamp on-board LEDs driving

Meets the requirements of ATEX Directive 2014/34/UE and related harmonized standards for Safe Area installation in connection with ECS’s clamps installed in ATEX Zone 1/21.

ATEX Marking
II (1)G [Ex ia Ga] IIC -20 °C ≤ Tamb ≤ +70 °C for gases, vapors and mists

II (1)D [Ex ia Da] IIIC -20 °C ≤ Tamb ≤ +70 °C for dusts

Clamp input Ex i
Uo=7.2 V, Io=345 mA, Po=621 mW, Co(IIC)=13,5 μF, Lo(IIC)=149 μH

LEDs outputs Ex i
Uo=7.2 V, Io=23 mA, Po=42 mW, Co(IIC)=13,5 μF, Lo(IIC)=34 mH

Monitoring contact
1x SPDT max 230Vac/1A 24Vdc/1A (resistive/inductive load)

Interlock contact
1x N.O. max 230Vac/1A 24Vdc/1A (resistive/inductive load) up to SIL2 acc. IEC 61508 (ECS-RF-DIN only)

Power supply
230 Vac + 5%

Max current
150 mA

Resistance threshold
10 Ω

Dimensions
162 x 90 x 63 mm (W x H x D)

Parameter Name	Parameter Value
Type	grounding resistor
Applications	for safety
Other characteristics	ATEX