The F/I, F/U converter is used to convert frequencies into a normalized linear analog signal.
Aside from the quality and stability of its output signal, special mention should be made of the simple configuration of the converter using a PC interface (RS232). The output signal can be set for the typical test and control ranges of 0 – 20 mA, 4 – 20 mA or 0 – 10 V.
Optimized for control and monitoring applications in drive, system and process engineering, the F/I(U) converter can convert a wide variety of signals from rotational speed sensors, rotary pulse encoders or proximity switches.
It can process NPN, PNP, push-pull or TTL outputs, as well as sine wave signals from tacho generators and passive sensors. The normalized signal provided by the F/I(U) converter means it can be easily connected to PC or SPS controllers, recorders or indicators.
Power supply 18 ... 32 VDC
Operating temperature -20°C ... +60°C / -4 °F ... +140 °F
Dimensions 43 x 70 x 114 mm
Degree of protection IP20
Type approval Part-No. 5870*: -
Part-No. 5873*: DNV GL

Parameter Name	Parameter Value
Signal type	frequency-to-analog