EXHIBIT WITH US Sign In

Electromagnetic clutch MIC series

Electromagnetic clutch MIC series

Electromagnetic clutch MIC series

About


Small clutches for use in copy machines, printers, and other peripheral devices. This one-piece assembly features a custom-molded gear or timing pulley designed to your specifications. Most clutches use a permanent magnet to disengage the armature when it is not in use. All clutches are bi-directional. A three pronged dog bone output is also available.

CUSTOM MOLDED GEAR
The MIC assembly includes a custom-molded gear or timing pulley designed to your specifications.

ONE PIECE ASSEMBLY
The entire assembly is delivered pre-assembled, so it simply slides onto the shaft. There are no adjustments to make or gaps to set.

BI-DIRECTIONAL OPERATION
The clutch has the ability to drive clockwise or counterclockwise.

PERMANENT MAGNET RETURN
All standard units come with a permanent magnet armature return attached to the inside of the gear. This provides a fast and smooth disengagement of the armature when power is released to the clutch coil.

ZERO BACKLASH
If needed the armature can incorporate a one-piece spring that eliminates backlash.

LONG LIFE
Special bushings allow for millions of operating cycles for most applications.

D-CUT BORE
The bore of the clutch is made to fit a D-cut shaft to simplify installation and eliminate the need for set screws.

TWO CLUTCH POWER CONNECTION OPTIONS AVAILABLE
MIC clutches can come complete with a lead wire and a customer's specified terminal or the standard connector built into the clutch coil housing.



PARAMETERS

Parameter Name Parameter Value
Type
disc
Operation
electromagnetic, spring
Other characteristics
  • bi-directional
  • permanent magnet
Rotational speed (rpm)
300 - 300
Power (W)
  • 3 - 3
  • 4 - 4