The Warner P310 VAR 00/VAR 10 is pneumatically operated, toothed clutch, and functioning under pressure.

Product Features
Utilisation

Coupling of a pulley or a hub
Engagement has to be made at standstill or at very low speed, in case of doubt consult the factory

Particularities

Positive coupling for drive without slipping
Standard available for random or synchronized operation (one or more position(s)/rev) Multi-position/rev as option (VAR n0, “n” indicates number of positions)
Option : detection disc allows the coupling position to be validated
Stationary compressed air distribution included
Sealed bearings

Adjustment

Verify position of tooth prior to installation
no wear adjustment required

Mounting Precautions

The ball bearing life is a function of the speed and pressure, refer to curve shown (see diagram)
The anti-rotation device of the cylinder shall be inserted in anti rotation slot, with a side play of 0,5 mm and a 1 mm play to the bottom. This avoids a normal stress on the ball-bearings.
It is forbidden to use in case of vibrations
The customers mounting method must take into account the axial thrust
Device intended for horizontal use, for vertical use please consult the factory

Power Supply

Oiled compressed air. For dry air please consult factory
Can be operated with hydraulic oil. In that case, please consult the factory

Parameter Name	Parameter Value
Type	disc toothed
Operation	pneumatic, hydraulic
Torque (Nm)	600 - 600 100 - 100
Rotational speed (rpm)	1000 - 4300