About
Temperature Controllers
Use only digital temperature controls with Type K thermocouple inputs. The temperature control output must match the input of the power control (i.e., 4-20mA or 0-10VDC). A standard PID-type control with a wide proportional band setting will work best to minimize temperature overshoot. PID parameters may be auto-tuned, but only at temperature specifications below the maximum of the heater. Monitor the heater temperature rise and turn power off immediately if it rises above the heater specification during the auto-tune cycle. This product can be connected to control the TUTCO SureHeat SCR model F066823.
Product: F076361
Compatible with: All Tutco SureHeat Products using Thermocouples, Thermocouple Adapters, and SCRs
Description:
1/16 DIN Sized Temperature Controller
NEMA 4X Front Panel ( IP65 )
Type K Thermocouple Inputs
Input: 120/240VAC, 50/60Hz
Output: 0-20mA
Alarm Relay
UL Recognized, CSA, CE
PARAMETERS
| Parameter Name | Parameter Value |
|---|---|
| Display |
digital
|
| Type |
PID
|
| Protection level |
|