The Z-10-D-OUT is used to drive N.10 MOSFETS from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial interface. The digital output max load is 0,5 A (inductive) and 0,5 A (resistive) with maximum switch-on / switch-off cycle frequency of 2 cycles/second. The module is ModBUS Slave and can be coupled with any ModBUS Master device. A 3-way galvanic isolation among Power supply // output // RS485 circuits assures the integrity of your datas.

Power supply: - 10..40 Vdc / 19..28 Vac
Outputs: - 10-CH optoisolated channels, mosfet semiconductor
Outputs protection: - From short circuit and overvoltage with 6..40 Vdc range
Diagnostic: - Channel status, programmable
Serial communication: - RS485 MosBUS RTU
Dimensions: - 17,5 x 112 x 100 mm
Mounting: - 35 mm symmetrical 46277 DIN rail

Parameter Name	Parameter Value
Signal type	digital
Bus	Modbus RTU, RS485, Modbus
Mounting	DIN rail
Other characteristics	slave