ZC-24DI is used to interface N.24 digital signals (PUSH BUTTON, LIMIT SWITCH, REMOTE, CONTROL SWITCH, RELAIS etc.) with all of control systems which are able to communicate by the protocols CANopen or ModBUS RTU (protocol selectable through dip-switch). It disposes of 32 bit counters (N.8), maximum frequency input is 10 KHz. A 3-way galvanic isolation among Power supply // input // RS485 circuits assures the integrity of your datas.

Power Supply: - 10..40 Vdc, 19..28 Vac
Max power consumption: - 2,5 W
Insulation: - 1,5 kVac (3 way)
Response time: - 2,5 ms
Operating temperature: - -20..+65°C
Dimension: - 35 x 100 x 112 mm
Channels: - 24
Polarity: - EN 61131-2 sink (npn)
Counters: - 8 @ 32 bit (max 10 kHz)
Pulse width: - Min 250 μs
TPDO: - < 1 ms

Parameter Name	Parameter Value
Signal type	digital
Bus	Modbus RTU, RS485, CANopen
Type	remote
Mounting	DIN rail
Other characteristics	slave