MIOS system is a special design isolated signal remote I/O system, it linked a local area network designed to connect controllers to remote I/O chassis and replacement of discrete wirings by fieldbus or industrial Ethernet communication.
MIOS supports up to 31 slots with as many as 128 I/O points in each system. If you need more, you can expand your system with Ethernet router, easily support thousands of I/O points in a single system

-. Support universal Input Signal
-. Local area network designed for factory-floor applications
-. Connects controllers to remote I/O chassis and other intelligent devices
-. Channel to channel isolated Remote I/O
-. Built-In Web Server
-. Dual Channel , Power Hot Swap Supported
-. Support Multi Communication Protocols
-. Flexibly Configuration With Sorts of Full Isolated I/O models
-. MWG1 main module support up to 31units I/O modules
-. Back board designed with redundant power-supply interfaces

Power Supply:
24VDC±10%
MWG1 ≦ 1W, other module ≦ 3W
Analog input:
Max 60 channels
Digital input:
Max 60 channels
Analog output:
Max 60 channels
Digital input:
Max 60 channels
Communication (RJ45 port):
10m/100m Protocol Modbus TCP, TCP/IP, http
Modbus TCP(client) Max 6 connections
http (client) Max 2 connections
Communication (Modbus Port):
Protocol Modbus RTU
Address ID range 1~254
Insulation Resistor:
>100MΩ / 500V between the input / output
Isolation Strength:
AC1500v 1min between the input / output
Ambient Temp. / Humi.:
-40 ~ 85 C / ≦95% RH
Dimensions:
113 X 109 X N mm (N ≦17.5*32)
Terminal Wiring:
Screw mounting, AWG #26-12
Comm Interface:
Mini USB
Standard:
EN61326-2003

Parameter Name	Parameter Value
Signal type	digital, analog
Bus	Fieldbus, Ethernet
Type	remote safety
Applications	automation PLC for sensors
Number of inputs/outputs	multi-channel 8-channel 4-channel 8 digital inputs 8-I/O 16-channel 2-I/O
Mounting	DIN rail plug-in rack
Other characteristics	compact flexible programmable