EXHIBIT WITH US Sign In

Digital I/O module Z-5DI-2DO

Digital I/O module Z-5DI-2DO

Digital I/O module Z-5DI-2DO

About


Z-5DI-2DO is a mixed digital module with a Micro USB front programming port, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with maximum frequency 5 kHz and settable forwards or backward, nr.2 SPST relay outputs 2 A 250 Vac NO / NC type selectable via jumper. All totalizers are stored in non-volatile memory (FeRAM). For each input, the module offers the measure of the period, frequency, TON, and TOFF.
The module has 1.500 Vac isolation between the input and the remaining low voltage circuits and 3.000 Vac between outputs and the remaining low voltage circuits. The instrument stands out for its wide range of operating temperatures (-20 .. + 65° C) and configuration flexibility.
Z-5DI-2DO supports RS485 serial communication with Modbus RTU protocol, up to 64 nodes without repeater up to 115 kbps. The power supply wiring and serial connection are facilitated through a bus that can be housed in the IEC EN 60715 guide.

Power supply: - 10..40 Vdc, 19..28 Vac
Insulation: - 1,5 kVac (input/other circuits), 3,75 kVac (output/other circuits)
Input: - 5-CH reed, proximity, pnp, npn, contact etc.
Output: - 2-CH relay 5 A, 250 Vac
Operating mode: - I/O slave, time based control logic
Protocol: - ModBUS RTU slave



PARAMETERS

Parameter Name Parameter Value
Signal type
digital
Bus
Modbus RTU, USB, RS485
Number of inputs/outputs
  • with relay output
  • 2-O
  • 5-I
Mounting
jumper
Other characteristics
slave