About
The Ixxat Safe T100/CS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category 4 in ISO 13849-1.
Safe T100/CS is primarily designed to be used together with Anybus CompactCom, where the safety communication uses the black channel principle through Anybus CompactCom. For CIP Safety, CompactCom takes over the EtherNet/IP Adapter functionality and the safety module implements the CIP safety layer and safe control of three dual-channel inputs as well as one dual-channel output.
The module's very compact size and flexible safety I/O routing make it perfect for integration into customer specific device solutions.
Features and Benefits
All necessary functions and methods to achieve SIL-3/Performance Level e (PLe) on one board — simplifies customer board design
IOs configurable for single and dual channel use
Pre-certified concept and hardware for easy re-certification of the final device
Provision of full documentation set including TÜV type approval
Direct connectivity to Anybus CompactCom module for non-safe fieldbus communication - safe and non-safe communication on the same wire
PARAMETERS
| Parameter Name | Parameter Value |
|---|---|
| Signal type |
digital
|
| Bus |
EtherNet/IP, Fieldbus
|
| Type |
safety
|
| Mounting |
for integration
|
| Other characteristics |
|
