Compact high dynamic servomotor.
Feedback from incremental encoder at 2500ppr.
Optional parking brake.
Cable power and signal output.

Type
- Low inertia permanent magnet servomotor

Rotor
- rare earth permanent magnets ( NdFeB )

Insulation
- insulation class F ( 130°C )

Winding
Standard
- Version with 230VAC winding for 230VAC or 400VAC mains drive
- Version with winding for drive powered at 60VDC

On demand
- there are no winding variants.

Insualtion -
- motor in F class

Thermal protection sensors
Of serie
- not available

Option -
- not available

Cooling
- natural air

Standard protection
- IP65 (excluding the shaft side). IP65 protection is obtained by adding a sealing ring to be positioned on the shaft side on request. It is intended effective only in the presence of an oil bath coupling or with the presence of lubricant.

Environmental installation conditions
- Indoor installation, free from corrosive or flammable gases.
- Humidity 85% RH or lower
- Vibration resistance 49m / s²

Parameter Name	Parameter Value
AC/DC	DC
Type	synchronous
Voltage (V)	60 - 60
Protection class	IP65
Configuration	permanent magnet with brake compact
Number of poles	8-pole
Cooling mechanism	air-cooled
Other characteristics	low-inertia
Power (W)	100 - 100
Intensity (A)	0.92 - 2.7
Torque (Nm)	0.32 - 0.32 0.96 - 0.96
Rotational speed (rpm)	5000 - 5000
Operating temperature (°C)	0 - 40