Stepper motor with integrated positioning control

Version:
2-phase high-torque stepper motor in NEMA 17 (42 mm) size and 1.8° increment angle (full increment) with integrated position control.

Note:
Stepper motor with integrated positioning control. A convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip.

Actuation via single I/O interface, 31 position configurations and call-ups.

Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free of charge download.

Technical data:
Control voltage: +24 V to +36 V DC
Motor voltage: +24 V to +48 V DC
Interfaces: Digital I/0-BAC, frequency/direction
Retaining torque: up to 0.45 Nm
Rotor moment of inertia: 0.068 kgcm²
Current drop: adjustable
Inputs: 6 (+24 V to +36 V DC)
Outputs: 2 (+24 V)
Application temperature: 0 °C to +50 °C

Application:
Converter:
USB to RS-232 (9-pin SUB-D connector). This USB stick transfers serial data with TTL level to the PC or notebook via the USB interface. Length ca. 500mm with 1.8 m USB extension cable.
Adapter:
15-pin SUB-D socket to 15-pin SUB-D connector and 9-pin SUB-D socket, length approx. 170 mm.
Connection cable:
15-pin SUB-D HD socket, length 5 m. Drag-chain compatible.

Parameter Name	Parameter Value
AC/DC	DC
Type	stepper
Other characteristics	low-noise integrated-drive
Diameter (mm)	22 - 73