HART® MULTIPLEXER MODEM 256 CHANNELS
DESCRIPTION
The HART® Multiplexer Modem 5700 interfaces up to 256 smart devices (transmitters, I/P, proportional valves, etc…) in a HART® Network. Each device can be fully identified, configured and monitored by a remote PC running an FDT-based software package (PACTware™, etc...) through a dedicated Device Type Manager (DTM).
The module is intended to be mounted on the following Termination Boards:

• TB-D5001-HRT-003: to be used with G.M. International AI/AO Termination Boards;
• TB-D5001-HRT-004: to be used with DIN-Rail mounted barriers/isolators or direct field connections, for 4-20mA loop signal;
• TB-D5001-HRT-005: to be used with DIN-Rail mounted barriers/isolators or direct field connections, for 1-5V loop signal.

Termination board types can be combined to manage different interfaces at the same time, simply respecting maximum number of connected channels.
The HART® Multiplexer Modem 5700 is SIL 3 certified as non-interfering with the signal loops.
The module guarantees three-port (supply/interface/channels) isolation.

In order to communicate with the hardware, an RS232/RS485 converter should be connected to the serial port of the Host. The suggested converter is the D1061S.

Parameter Name	Parameter Value
Type	data
Network	RS232 RS485 network
Mounting	SIL
Other characteristics	multi-channel