About
TCW280 is an Ethernet analog output module with galvanically isolated ports.
Analog output module supports two channels with voltage or current loop modes. The channel mode is WEB interface configurable. The available choices are – 0-20mA, 4-20mA, 0-24mA, 0-5V and 0-10V. Both channels have 12-bit resolution.
The device has 4 open drain outputs. All they are configurable either as standard digital outputs (On/Off) or as PWM outputs. In PWM mode, the outputs supply up to 2000Hz with 10-bit resolution.
Analog outputs and open drain outputs are galvanically isolated from the module’s power supply. The isolation between the two parts is 1000VDC.
2 analog voltage or current loop outputs with 12-bit resolution;
4 open drain outputs with PWM and ON/OFF modes;
2 relays with normally open and normally closed contacts;
MODBUS TCP/IP support;
SNMP v.2 support;
SNMP traps to up to 5 recipients like alarm alert;
Password protected WEB based configuration and control;
Periodical HTTP Post for client-server systems;
XML/JSON status files;
HTTP API commands;
NTP support;
Dynamic DNS support;
Back/restore for easy device settings multiplications;
Remote firmware update over the WEB interface.
PARAMETERS
| Parameter Name | Parameter Value |
|---|---|
| Signal type |
analog, digital
|
| Bus |
Ethernet, Modbus
|
| Type |
remote
|
| Mounting |
standard
|
| Other characteristics |
|
