About
The MPNC035 module has 4 independent and individually programmable analog outputs for generation of voltage, current and PWM outputs.
This module can be used as extension of PLC (TPAC) / operator panels (TP) and any other panel that has a Modbus or CANopen communication protocol.
Depending on the communication interface it is necessary to add a "head" to communicate with panel: MPNC010 for CANopen protocol and MPNC006 for Modbus protocol.
Up to 16 analog and digital modules can be added in the same line.
Analogue outputs:
0÷10V: 0÷10000 - minimum load 1Kohm
4÷20mA: 0÷20000 - maximum load 500ohm
PWM: fixed frequency 250Hz - output impedance 10Kohm
Resolution: 12 bit
Precision: 0,5% FS
Power supply: 24Vdc ±15%, 0.65W (without loads)
Dimensions: 115(l)x115(h)x(22.5mm depth)
Working temperature: 0-50°C
Protection: IP20
PARAMETERS
| Parameter Name | Parameter Value |
|---|---|
| Signal type |
analog, digital
|
| Bus |
Modbus, CANopen
|
| Other characteristics |
programmable
|
